LD-108A/B
I. Introduction
LD-108A/B is a 2-component adhesive, with tremendous thixotropic and hardness. After curing, the surface is smooth and shiny. It has no bubbles, strong adhesion, excellent acid and alkali resistance, water proofing property, stain resistance, humidity resistance, and weather resistance.
II. Application
LD-108A/B is widely used in the bonding of all kinds of stone, metal, ceramics, wood, glass. You can apply it on the sanitary, balcony, glass window, floor, the corner of the wall, basin, tabletop, etc.
III. Product Technical Reference
|
Item |
Base resin 108A |
Hardener 108B |
|
Appearance |
Semi-transparent viscous liquid |
colorless clear liquid |
|
Specific gravity 25℃ |
1.02±0.01 |
0.95±0.01 |
|
Flash point |
>140℃ |
>140℃ |
|
Mix proportion （weight ratio） |
108A ：108B = 1 : 1 |
|
Usable time（100g*25℃*min） |
15 min |
|
Condition of cure |
25℃×2h |
|
Flexural strength（unit: kg/mm2） |
15 |
|
Tensile strength（unit: kg/mm2） |
13 |
|
Compressive strength（unit: kg/mm2） |
35 |
|
Hardness（Shore D） |
78 |
|
Heat deflection temperature（unit：℃） |
50 |
|
Water absorption 25℃/24h（unit：%） |
＜0.3 |
IV. Cautions
1. Keep the bonding surface clean and dry, free of dust and grease.
2. In most cases, applying the thickness of 0.8 mm adhesive at the bonding seam shall be sufficient for bonding.
3. Excess adhesive can be cleaned off with a rag dipped with small amount of alcohol or acetone before fully curing.
4. Keep away from children.
5. Store the product in a dry, cool location and keep away from heat or fire.
6. Carefully remove the caps to avoid contact with skin and eyes. If the eyes are contaminated, flush immediately with water. Medical attention should be obtained promptly.
V. Storage and Packaging
1. When the product is stored in a dry and cool place away from light, the shelf life is 1 year.
2. Packaging: 12ml*2 tube kit
